Classic model! ?Modern station with passenger hall flooded with light. The restaurant section can be furnished with the tables and benches supplied to give the building a very natural atmosphere. (Text from the original catalogue). This model follows the original that was at that time Goch Station located on the lower course of the Rhine. First launch: 1966 Contents: Station kit including a reprint of the FALLER magazine of that time. This building kit contains: 206 single parts in 12 colours, 1 paper mask, 1 decoration and 1 construction instruction. Use for handicrafts FALLER - plastic glue.

Retro asymmetry! Classic vintage model of a small service station with servicing hall, glazed reception room, dispensing pumps, advertising sign and lamps (without function) as well as some more accessories. First launch: 1958. This building kit contains: 75 single parts in 6 colours, window parts, 1 paper mask, 1 decoration and 1 construction instruction

Historical collector?s object, re-edited! Highlight from the former series of FALLER old-town kits. Town wall with built-in square fortified tower and old-town wall part with wall-walk directly leading to a dwelling house. The interior of the townscape is marked by a dwelling house placed onto the town wall, with passage for pedestrians. First launch: 1965. Packaging in retro look including a reprint of the FALLER magazine of that time. Size:249 x 184 x 142 mm

with glass-roofed vestibule and station clock; especially suitable for small layouts and branch lines. This building kit contains: 38 single parts in 5 colours, window parts, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 121 x 78 x 49 mm

A typical country station. This building kit contains: 86 single parts in 9 colours, window parts, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 202 x 102 x 75 mm

with built-on goods shed. This building kit contains: 159 single parts in 9 colours, window parts, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 250 x 140 x 120 mm

Typical provincial-town brick station, with roofed platform in cast iron construction. For extension the platforms art. 120204 are suitable. This building kit contains: 82 single parts in 6 colours, window foil, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 240 x 125 x 135 mm

Attached freight station, covered waiting room and separate utility building. This building kit contains: 297 single parts in 9 colours, window parts, 1 paper mask, 1 decoration and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions railway station: 308 x 140 x 142 mm Dimensions sanitary building: 151 x 77 x 75 mm

Original reproduction of the city railway station built around the turn of the century, with detailed, abun?d?ant interior furnishings, opening portal doors, decoration parts and interesting internal lighting effects (not enclosed). Assembling the model is considerably simplified in that the various blocks of the building aisles are separately assembled and then joined to form the entire building. This building kit contains: 929 single parts in 9 colours, window foil, 6 paper masks, 1 decoration and 1 construction instruction. Use for handicrafts FALLER - plastic glue. 900 x 284 x 280 mm

Many accessories which realistically enliven the appearance of the station such as: route indicators, loudspeakers, clocks, wastepaper bins, train-formation indication boards, benches, timetable boards, illuminated kiosk, luggage lockers, ticket offices and various advertising signs. Particularly interesting effects result by illuminating the centre reception building. The kiosk and ticket office here can also be illuminated. The intermediate and corner buildings can also be illuminated. Setting up this large model is significantly simplified by the fact that the five building complexes are individually assembled and are then only arranged to form the complete model. This building kit contains: 627 single parts in 9 colours, window parts, 8 paper masks, 1 decoration and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 700 x 160 x 130 mm

Replica of the original Trossingen station in Tuttlingen county as it has existed since about 1898. A half-timbered style construction with wooden lags in the attic, masoned ground floor, attached freight shed with loading ramps and attached tower in the entrance area. An updated version of the station is still standing today. This building kit contains: 490 single parts in 11 colours, window foil, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 360 x 190 x 245 mm

A classic urban station with richly decorated facades, spacious entrance hall and many decorative acces?sories for the interior and around the building. This building kit contains: 335 single parts in 9 colours, window parts, 5 paper masks, 1 decoration and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 446 x 160 x 130 mm

he railway station ?Schwarzburg? built around 1900 is the attraction of any model instalaltion. With half-timber construction, open, roofed shelter platform, richly structured hip roof and attached goods shed. With many carefully designed details - thus, the waiting room is completely equipped, the doors can be opened and many beautiful accessories for the building are contained in the construction kit. On the Rottenbach-Katzh?tte line situated in the Thuringian Forest, railway modellers can find the railway station Schwarzburg built around the turn of the century. But no matter from which side, the particular charm of this attractive FALLER models lies in the numerous amount of add-ons and oriels as well as in the luxuriant structure of the pretty hip roof. A railway station model with which the most varied station concepts can be implemented. From small station halts to small town stations of a medium sized railway station model. This building kit contains: 406 single parts in 10 colours, window parts, 2 paper masks, 1 decoration and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 550 x 185 x 230 mm

Faithful reproduction of the original station built in 1892 and located south of Gera in Thuringia. Two-coloured clinkerbuilt construction in the typical style, consisting of main building, goods shed and adjoining waiting/forwarding room. This building kit contains: 441 single parts in 9 colours, window foil, 3 paper masks, 1 decoration and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 475 x 190 x 160 mm

Pure idyll in the station area of ¯Stugl-Stuls® classified as a historical monument! Set of filigree laser cut models comprised of Rhaetian Railways ¯Stugl-Stuls® station with gatekeeper?s house, which was put into operation in 1903 on the Albula line. That historical railway ensemble of wooden buildings also includes toilets and a bath house intended for passengers as well as a plain small livestock stable with asymmetric double-pitch roof. Contents: Station, gatekeeper?s house, toilets, bath house, small livestock stable Size:192 x 114 x 77 mm, 116 x 92 x 75 mm, 47 x 50 x 37,5 mm, 36,5 x 34 x 35 mm, 56 x 57 x 36 mm

Three-storey station building on a rectangular base with adjoining roofed platform and the suitable platform decoration. Interesting visual elements are the eaves moulding with ancon frieze at the low pitched hipped roof as well as the semicircular arched windows and entrances on the ground floor.

Beinwil station is located on the line in the Seetal valley between Emmen and Lenzburg in the Aargau. That typical station fascinates through its half-timbered construction and its canopy with wooden columns. The shape novelty made of real timber and graphic arts cardboard impresses through its intense detail rendition. Size:224 x 150 x 163 mm

Limited model of a three-wing reception building. The middle section and corner buildings of the late classical sandstone building form an H-shaped floor plan. The equipment includes a glass roof over the platform. This building kit contains: 668 single parts in 9 colors, window parts, 3 paper masks and 1 construction instruction.

Narrow-gauge station with solid stone walls and deep door and window recesses in the style of Engadine houses, similar to the original erected in 1913 in the Swiss canton of Grisons. A large loading area in the front extends the ground plan.

Multiple uses. Laser-cut model of ¯Waldhausen® country halt located on the Amstetten-Gerstetten local railway line operated by the Ulm Railway Friends, with plinth all around, light-coloured rendered facade and a double pitch roof at a right angle. This building kit contains: 55 single parts in 9 colours, window foil, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER EXPERT Lasercut glue. Size:93 x 63 x 68 mm

Narrow signal tower building with three vertical masonry semicircular gates and double-pitch roof. The control room with windows is located on the upper floor. Size:204 x 74 x 143 mm

Covered platform in filigree iron construction with passenger way out. Numerous decoration accessories such as e.g. kiosk, supervision booth, train destination indicator, benches and litter bins are part of the kit. The platform ideally matches ¯Friedrichstadt® station, Art. 190297. Size:931 x 105 x 58 mm

Faithful reproduction of the original footbridge built in Neustadt, to go with FALLER station ?Neustadt/Weinstra?e? 110111. Present-day steel and glass construction with two covered stairways, bridge spanning two tracks and two annexed elevator towers (without function). The width of both rising and descending flights of stairs annexed to the bridge can be modified according to a module to match any type of track. Several units can be built side by side. Suitable for catenary operation. Without platforms. Can be used with any type of FALLER platform. This building kit contains: 236 single parts in 3 colours, window parts and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Faithful reproduction of the original footbridge built in Neustadt, to go with FALLER station ?Neustadt/Weinstra?e? 110111. Present-day steel and glass construction with two covered stairways, bridge spanning two tracks and two annexed elevator towers (without function). The width of both rising and descending flights of stairs annexed to the bridge can be modified according to a module to match any type of track. Several units can be built side by side. Suitable for catenary operation. Without platforms. Can be used with any type of FALLER platform. This building kit contains: 236 single parts in 3 colours, window parts and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 320 x 240 x 126 mm Clearance: 83 mm Width of stairs: 28 mm

For furnishing signal-tower rooms with typical devices. This building kit contains: 168 single parts in 3 colours, 1 decoration and 1 construction instruction. Use for handicrafts FALLER - plastic glue.

This half-timbered building has an outside staircase and interior details on the second floor. This building kit contains: 58 single parts in 5 colours, window parts, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 83 x 62 x 101 mm

Brickwork construction, slating and half-timbered construction in the upper region of the signal tower. This building kit contains: 63 single parts in 5 colours, window foil, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 130 x 80 x 120 mm

This signal tower was built in 1886 in the area of the Constance railway station. The original installation on stilts above a transit rails as well as panorama glazing are due to the fact that a good view of the rail system for the entire station area had to be ensured. Today, the original signal tower in its original colours is located in Blumberg in the area of the ?Sauschw?nzle-Museumsbahn?. This signal tower is versatile and space-saving as it is installed across a rail. This building kit contains: 156 single parts in 4 colours, window foil, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 197 x 82 x 114 mm

A structure spanning two tracks. Catenary operation is possible. This building kit contains: 133 single parts in 8 colours, window parts, 2 paper masks and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 179 x 168 x 160 mm

Timber construction as it is some?times still used at small railway stations. This building kit contains: 53 single parts in 2 colours and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 130 x 56 x 106 mm Clearance: 70 mm

This small, rotating loading crane can be installed wherever goods must be handled. Without raising or lowering function. This building kit contains: 33 single parts in 1 colour and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: ? 26 x 83 mm

with shed attached on one side and board cladding of the top storey.(note does not include crossing arms) This building kit contains: 95 single parts in 7 colours, window foil, 1 paper mask and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 100 x 92 x 84 mm

With manually movable loading crane and tender. For small service areas. This building kit contains: 119 single parts in 4 colours and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 210 x 80 x 130 mm

Alongside the railway line there are many types of shelters for the linemen. In the waiting shelters for the engine drivers the locomotive personnel is waiting for the servicing of the locomotives. This building kit contains: 23 single parts in 2 colours, window parts and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions 1: 32 x 29 x 37 mm Dimensions 2: 27 x 34 x 29 mm (2 x)

The advertising signs and the magazines are included in the construction kit. This building kit contains: 42 single parts in 5 colours, window parts, 1 decoration and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions mushroom shaped kiosk: 50 x 50 x 60 mm Dimensions kiosk: 70 x 40 x 50 mm

each 172 mm long, with rails moulded on (same as base plate of 120149). This building kit contains: 14 single parts in 2 colours and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 172 x 57 x 16 mm

These delicate swivel water spouts with rotary upper parts feature an external heating system. 2 gully grates are also included. This building kit contains: 24 single parts in 1 colour and 1 construction instruction. Use for handi Dimensions: 78 x 15 x 70 mm (2 x) crafts FALLER - plastic glue.

Faithful reproduction of a filigree steel structure, with vertical storage container. To build interesting combinations with another sanding tower, a bridge gangway is part of the kit (as 120146). This building kit contains: 26 single parts in 1 colour and 1 construction instruction. Use for handicrafts FALLER - plastic glue. Dimensions: 37 x 37 x 134 mm