Logo for the company: Noch Roco is a well known European Brand for 2 Rail and 3 Rail layouts.
Link to the Current 'Start' Catalog
All prices are in New Zealand dollars and include appropriate taxes
 
 
In stockNot in stockNot available from Manufacture

Listings 1 to 50 of 812 items First PageAll PagesLast PageNext Page
ROC052163 piece set: Tank container
3 piece set tank container. The model can be used in combined traffic. ■ New construction
In Stock

NZ$58.99

(export price NZD$51.30)
ROC10000Track Nails - Short
400 per packet
Available for ordering

NZ$13.49

(export price NZD$11.73)
ROC10002ROCO Rubber.
Track cleaning rubber; this special rubber is excellent for cleaning the rails of dirt and oilresidue; suitable for all gauges
In Stock

NZ$26.95

(export price NZD$23.43)
ROC10003Micro Fibre Cleaning Cloth
In Stock

NZ$17.99

(export price NZD$15.64)
ROC101236Light Tubes
Available for ordering

NZ$6.49

(export price NZD$5.64)
ROC106208Tender Bogie
Available for ordering

NZ$8.95

(export price NZD$7.78)
ROC106865Coupling Holder

NZ$4.99

(export price NZD$4.34)
ROC10757Z21 Booster Connection Cable
Available for ordering

NZ$22.95

(export price NZD$19.96)
ROC107693Sirene - SNCF BB-63000
Available for ordering

NZ$5.49

(export price NZD$4.77)
ROC10788Controller with switching power supply
This controller set is best suited for beginners and running just one train. It consists of one controller and plug-in transformer, designed to compliment each other. The controller gives a definite forwards and backwards control and speed settings. The control knob clicks gently into a zero position. Automatic overload protection. Easy connection to the layout using the pressure connection clips. Technical data: ■ Running voltage: 0–14 V=/0.6 A ■ Separate accessory output: 14 V=/0.85 A ■ Automatic overload protection ■ Regulator with zero point setting Requires NZ adapter. Search "Korjo".
In Stock

NZ$139.95

(export price NZD$121.70)
ROC10789Z21 Booster Adapter
Available for ordering

NZ$69.95

(export price NZD$60.83)
ROC107926Radkontakt BR80
In Stock

NZ$5.49

(export price NZD$4.77)
ROC10797Z21 Multi-Loop
The Z21 multi LOOP reverse loop module is ideal for the comfortable and safe operation of track layouts such as terminal loops, triangular junctions and turntables. Operation modes: ■ short-circuit detection - easiest wiring ■ sensor tracks - short circuit free detection ■ switching contacts - detection via circuit tracks or reed contacts ■ combined operation - double safety Compatible with ■ DCC ■ MM ■ RailCom ■ analogue mode Note on sensor tracks / sections! Since sensor tracks / sections are not themselves supplied with power, they must not be too long, especially with regard to short, slower locomotives. Ideally they should be between 4.0 and 5.5 cm long in H0 and 2.0 to 3.0 cm in N. RailCom is a registered trademark of the Lenz Elektronik GmbH, Gießen.
In Stock

NZ$174.95

(export price NZD$152.13)
ROC10807Z21 Dual Booster
Z21 dual BOOSTER ■ Power 2x 3 A (track outputs) ■ Voltage can be set for both track outputs separately via app or PC via Z21 (12–24 V) ■ RailCom global detector (allows POM reading in the booster section) ■ Terminal loop feature can be separately configured by means of short-circuit detector ■ Brake generator feature can separately configured for both ■ Connections via CAN bus, B bus, CDE bus ■ Configuration and update simply by PC via CAN Please note: The power adapter is not included. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
Available for ordering

NZ$449.95

(export price NZD$391.26)
ROC10813Z21 wlanMAUS (10839)
Control unit with many operation functions. Several Z21 WLANMAUS can be simultaneously operated – possible with all Z21 systems (z21 start combined with WiFi Package) or if your own router is available with Art. no. 10818 – z21 activation code. The Z21 WLANMAUS gives you wireless freedom around your layout. ■ Wireless freedom, 29 functions per locomotive (including headlights) ■ Control of up to 9999 locomotives and 2048 turnouts ■ 100 locomotive addresses can be stored in the database and can be assigned with names (up to 10 digits) ■ Locomotive control with 14, 28 or 128 speed steps ■ Writing and reading of CV values 1–1024 on your locomotive decoder ■ Display with adjustable brightness ■ Controller with center position ■ Operated with commercially available standard batteries (3 x AAA, not included in the delivery) ■ 5 SSID passwords: current password + the 4 last passwords ■ 10 sets of points with 10-character names and 10 points each ■ Firmware updateable Contents: ■ Z21 WLANMAUS ■ Manual
Available for ordering

NZ$229.99

(export price NZD$199.99)
ROC108137Screw for Slider 86030
In Stock

NZ$2.59

(export price NZD$2.25)
ROC10814Z21 WLAN Package
z21 WLAN Package The z21 start can be extended to a network-enabled control center by using Access Point and an activation code. ■ You can easily control both trains as well as turnouts with your Smartphone or tablet via the popular Z21 App. ■ Self-explanatory control functions for your model railway layout (through icons, image integration etc.) ■ You can automate routes ■ Control your locomotives with photorealistic driver’s cabs for the ultimate driving experience – feel like a real locomotive driver ■ It lays the basis for PC guided automations (e.g. with Rocrail®, iTrain®, TrainController® etc. The z21 start WLAN package contains a preconfigured router and the activation code for the z21 start. This way the z21 start can accept commands for locomotives and turnouts via the WiFi interface and process them. Info: system requirement is a Windows PC or notebook as well as an existing Internet connection (only for activation of the Unlock code). Please also note our information sheet and the video: Activation of the z21 start with the WLAN package Contents: ■ Wifi Router ■ Switching power supply ■ Unlock code ■ Manual

NZ$75.95

(export price NZD$66.04)
ROC10818Unlock Code (z21)
The z21 activation code is required if you already have your own router. You can then use all the functions (see Art. no. 10814) of the z21 start including the start sets. Please note that extended network knowledge is necessary for this purpose.
In Stock

NZ$61.95

(export price NZD$53.87)
ROC10820Z21 digital control center
The Z21 digital control center connects your model railway system, digital locomotives and wagons to your tablet, smartphone or the Z21 WLANMAUS via WLAN. No advanced network knowledge required. It can be easily expanded with a variety of interfaces and is also the ideal basis for PC-based automation. Features: ■ Intuitive operation for beginners and professionals, controlling model railway locomotives using virtual, photorealistic driver's cabs for different vehicle types ■ Efficient management of even large vehicle fleets ■ Open multi-protocol control center for DCC and Motorola formats ■ Upgrade for existing digital systems through downward compatibility, e.g. Z21 multiMAUS, Lokmaus 2 ■ Switching of points and magnetic items ■ RailCom-capable ■ Decoder update option for software & sound for ZIMO sound decoders ■ Connection of smartphone, tablet PC, Z21 WLANMAUS, Z21 multiMAUS ■ Plug & Play - connect and get started! No activation code required! ■ Integration of camera locomotive via Z21 app ■ Integrated interface for connecting a PC ■ Simple connection with smartphone via pre-configured WLAN router Connections: ■ 3 x X-Bus ■ Main track for DCC and Motorola, 3 A, feedback capable ■ Separate programming track: for programming, decoder update, sound programming, feedback capable ■ Booster bus for Roco boosters 10765, 10805, 10806, 10807, CDE booster via 10789 ■ Roco feedback bus for Roco feedback module 10787 ■ LAN bus, CAN bus & LocoNet bus ■ Sniffer bus Dimensions Z21: 207 mm x 146 mm x 37 mm. Router dimensions: 174 mm x 144 mm x 30 mm. Scope of delivery: ■ Z21 digital control center ■ Switching power supply 10851 ■ Pre-configured WLAN router for plug & play use including switching power supply ■ 3 plug terminals RM3.5 2p ■ Operating instructions The rear plug terminal RM3.5 2p (item no. 96321) can be ordered as a spare part in the ET shop. Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
In Stock

NZ$959.99

(export price NZD$834.77)
ROC10833z21 start base digital set
z21 start base digital set. Z21 is a modular system: ■ Begin with the Z21 start control centre and the Z21 multiMAUS. ■ Retrofit possible using the WLAN router and activation code, Art. no. 10814, thus allowing the use of a smartphone, tablet PC, Z21 WLANMAUS and computer (software-supported model railway control centre). ■ If you have your own WLAN router and are familiar with WLAN networks, then the activation code 10818 is all you need for the abovementioned retrofit. Contents: 1 z21 start digital control centre 1 Z21 multiMAUS 1 plug-in power supply
Available for ordering

NZ$529.99

(export price NZD$460.86)
ROC10834Z21 Professional Digital set
Z21 professional digital set. Replaces 10821. The Z21 digital control centre connects your model railway system, your digital locomotives and your wagons via WLAN using your tablet, smartphone or the Z21 WLANMAUS. No additional network knowledge is required for the purpose. You can easily extend your Z21 digital control centre due to the numerous interfaces. This makes it the ideal basis for PC-supported automation. Contents: 1 Z21 digital control centre 1 Z21 WLANMAUS 1 WiFi router 1 plug-in power supply
In Stock

NZ$1129.99

(export price NZD$982.60)
ROC10835Z21 multiMAUS
Economically priced operating device with many possibilities. Several Z21 multiMAUS devices can be operated on the system at the same time. It is compatible with the old Lokmaus 2 system. Up to 9999 locomotive addresses can be operated with direct input; 64 can be stored in a data bank and labeled with names: for example 103RB (103 red-beige). Per locomotive up to 29 functions (including headlights) can be activated if the machine has been equipped accordingly. The locomotives can alternatively be operated with 14, 28 and 128 driving levels; this can be basically defined but if need ed it can be changed and adapted for each locomotive on demand. With two different ways of programming you can adjust your locomotive decoder according to your own wishes: The most important CV values from one to five are accessible with the button combination “menu” and 1–5, the total of 1024 possible CV values can be addressed with the programming menu. Of course all values up to 255 – depending on the decoder layout – can be programmed. Exporting CV 1–1024 in connection with the exportable amplifier (z21/Z21) is possible. Switch mode: the Z21 multiMAUS can switch up to 1024 magnetic devices! These elements have to be equipped with an electric device and be connected to a magnetic device decoder. The programming of the magnetic device decoder is done electronically via the tracks. In connection with 10764, that Z21 multiMAUS, which is inserted into the master input, goes to the central unit. ■ Firmware updateable Contents: ■ Z21 multiMAUS ■ Connection cable ■ Manual
In Stock

NZ$199.99

(export price NZD$173.90)
ROC10836Z21 Switch Decoder
The Z21 switch DECODER is an universally applicable DCC switching decoder with a ower output of 2 Amperes for up to 8 switches or up to 16 elements such as LEDs and bulbs. Simple connection A separate DC supply can be connected so that the control centre or booster outputs are not placed under unnecessary load. If the wiring should be as simple as possible, the rail signal can also be used as a supply. In addition, the outputs are protected against overload and short-circuits. Adjustable outputs Each of the 8 output pairs can be set to different modes independently of the other. These are already pre-configured and can simply be selected. Each output pair can also be individually dimmed so that lighting can be adapted precisely to requirements. It perfectly can be combined with ■ twin coil motors ■ simple light signals ■ all kind of illumination ■ the control of relays Highlights: ■ 8 output pairs can be set independently ■ Optional power supply via extra applied switching power supply ■ Programmable with RailCom® on the main track (POM) ■ Short-circuit protection against overload ■ Updateable Adjustable modes ■ Standard operation - with configurable cut-in time for twin coil motors ■ Instantaneous operation - for switches and uncouplers. Can be be activated with a manual controller depending on the operating time (see also 10775) ■ Bistable continuous operation - Switching on or switching over of the lighting and signals ■ Bistable continuous operation - Switching on or switching over with light bulb simulation ■ Alternative flash ■ Alternative flash with light bulb simulation ■ Item numbers of switches 1-2040 RailCom is a registered trademark of the company Lenz Elektronik GmbH, Gießen.
In Stock

NZ$172.99

(export price NZD$150.43)
ROC10837Z21 signal DECODER
Z21 signal DECODER The Z21 signal DECODER is a universally applicable DCC decoder for complex light signals. Operation is even easier with the Z21 app as the signal types are also stored in the app and can be read out automatically from the decoder. This can be conveniently done via Z21 pro LINK. ■ Updateable ■ Extensively configurable ■ RailCom compatible Over 30 signal types are included, such as: ■ Germany: H/V signals, Ks signals, HI signals, block signals, ... ■ Austria: Main signals class 1980 and 1954, pre-signals, protections signals, ... ■ Switzerland: System L, system N, Signals for shunting service, ... Additional signal types can of course be added by using the update function via the Z21 pro LINK. RailCom is a registered trademark of the company Lenz Elektronik GmbH.
In Stock

NZ$144.99

(export price NZD$126.08)
ROC10838Z21 pro LINK
Z21 pro LINK Configuring and networking of your Z21 hardware has now become even more simple and convenient. In addition, the Z21 pro Link also convinces users with its easy control and capacity to perform updates. ■ No complex CV tables ■ Integrated web server ■ Installed WLAN Configure ■ Directly via the installed display and buttons. Everything in plain text; no detours. ■ Large and convenient via the webpage on your PC or Smartphone. The integrated web server automatically detects the connected device. Update ■ Always keep your Z21 system up to date. ■ With the Z21 Updater App for iOS and Android. ■ Via PC with the Z21 Maintenance Tool. Control ■ The dream of the “Internet of Moba Things” or IoMT for short has become reality! ■ Communication with control commands and status queries directly via WLAN.
Available for ordering

NZ$129.99

(export price NZD$113.03)
ROC10857Z21 Switching power supply 120 Watts
Available for ordering

NZ$179.95

(export price NZD$156.48)
ROC10858Power adapter 9V 0.6A NZ Plug
In Stock

NZ$9.95

(export price NZD$8.65)
ROC108616Lamp T3/4 16V 30mA - 2 pack
Available for ordering

NZ$7.99

(export price NZD$6.95)
ROC10869Z21 XL BOOSTER
Z21 XL BOOSTER The Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages. The advantages of the Z21 XL BOOSTER ■ Output voltage 6 A at 20 V ■ Track format DCC and Motorola ■ B-BUS ■ CAN-BUS ■ CDE interface ■ RailCom receiver and transmission to control centre (CAN) ■ Forwarding of short-circuits to control centre (adjustable) ■ Firmware update (CAN) ■ RailCom cut-out, adjustable Motorola is a registered trade name of Motorola Inc., Schaumburg, Illinois. RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
In Stock

NZ$589.99

(export price NZD$513.03)
ROC10870Z21 XL Series
Z21 XL Series The new Z21 XL series has been especially adapted for the requirements of large gauges (0, 1, 2, G), and unites the advantages and the convenience of the Z21 system with high output voltages. In terms of the control centre scope of functions, the Z21 XL Series primarily differs from the Z21 through the track output with 6 Amperes of main track current. However, the rail voltage cannot be adjusted, and is dependent on the power supply unit used. In addition, the Z21 XL Series features a Z-CAN for a high number of Z21 XL boosters. The benefits at a glance ■ More output voltage with 6 A at 20 V ■ Control via WLAN provides high range and transmission security ■ Convenient Z21 App and Z21 WLANMAUS for the control of your entire system Included: ■ Z21 XL Series digital control centre ■ Power supply unit and cable 6 A 20 V ■ WLAN router & power supply unit
Available for ordering

NZ$1124.95

(export price NZD$978.22)
ROC108823Circuit Board
Available for ordering

NZ$49.99

(export price NZD$43.47)
ROC108876 Pole Decoder NEM651
Available for ordering

NZ$79.95

(export price NZD$69.52)
ROC10889Speaker Set
With this speaker set you can retrofit any sound. Complete set with sound box and connection cables. Dimensions: 10 x 15 x 9 mm Content: 2 pieces/package.
In Stock

NZ$22.99

(export price NZD$19.99)
ROC10890New Items 2017 :: Decoder 8pol. with Cable
Available for ordering

NZ$179.95

(export price NZD$156.48)
ROC10891New Items 2017 :: Decoder Plux22
Available for ordering

NZ$169.95

(export price NZD$147.78)
ROC10892New Items 2017 :: Decoder 8po. with Cable
Sound decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 0.8 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of the Lenz GmbH, Gießen. This sound decoder is equipped with a pre-installed Zimo sound (sound collection). You will find an extensive list of questions/answers that are frequently posed to us in Chapter 5 of this Zimo manual.
In Stock

NZ$229.99

(export price NZD$199.99)
ROC10893New Items 2017 :: Decoder Plux16
Available for ordering

NZ$184.95

(export price NZD$160.83)
ROC10894Decoder 8pol. with Cable NEM 652
Decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom® function. Maximum motor current: 1.0 A.
Available for ordering

NZ$84.99

(export price NZD$73.90)
ROC10895Roco/Zimo Decoder Plux16
Suitable for Gauge H0 and TT. The decoder is equipped with the RailCom® function. Maximum motor current: 1.0 A.
In Stock

NZ$79.99

(export price NZD$69.56)
ROC10896New Items 2017 :: Decoder Plux22
Suitable for Gauge H0. The decoder is equipped with the RailCom function. Maximum motor current: 1.2 A. For further technical data see data sheet. (Downloads) RailCom is a registered trademark of Lenz Elektronik GmbH, Gießen.
In Stock

NZ$99.99

(export price NZD$86.95)
ROC10900All purpose hobbyist‘s saw. For cutting track sections to size.
Available for ordering

NZ$27.45

(export price NZD$23.87)
ROC10905ROCO/Fleischmann Grease
Special lubricating grease for locomotive transmissions. This premium grease is particularly suited for plastic gears and provides an excellent glide effect. It cannot resinify or saponify, and it is resistant to pressure. Contents: 8 g
Available for ordering

NZ$23.99

(export price NZD$20.86)
ROC10906Roco Oil 20ml
Practical tool for properly “lubricating” sintered bearings of model locomotives. One drop per lubricating point is sufficient! Content: 20 ml
In Stock

NZ$29.95

(export price NZD$26.04)
ROC10908Seuthe Smoke Oil - 50ml
Same as the Marklin stuff but $5 cheaper....for the smart buyer!
In Stock

NZ$23.49

(export price NZD$20.43)
ROC110270Radsatz get.Achse DC h.Spk./AC
Available for ordering

NZ$23.49

(export price NZD$20.43)
ROC110272Radsatz m.2Haftr.m.Zahnr.h.Sp.
Available for ordering

NZ$23.49

(export price NZD$20.43)
ROC110527Wheel Set
Available for ordering

NZ$10.99

(export price NZD$9.56)
ROC112817Circuit board complete - Diesel. p.22xx
Available for ordering

NZ$54.99

(export price NZD$47.82)
ROC114197Bürstenfeder H0 D=2,8/1,6 L=8
Available for ordering

NZ$5.49

(export price NZD$4.77)
Listings 1 to 50 of 812 items First PageAll PagesLast PageNext Page

We accept Visa and Master Card or Direct Deposit and of course Cash/EFTPOS in person at our shop
Invercargill Shop
406 Yarrow St, Glengarry, Invercargill 9810
Phone 03 217 0572
email
Shop Hours
Wednesday to Friday 10:00am - 5:30pm
Saturday: 10:00am - 12:30pm
Sunday, Monday and Tuesday: Closed
Copyright Action Toys Limited 2025
Prices are subject to change and include GST
Bank Account :: (ANZ) 06 0925 0827499 00
Toottoot.co.nz is the trading name for Action Toys LTD